Olares

English

简体中文

English

简体中文

Appearance

Known issues ​

Use this page to identify and troubleshoot currently known issues with your Olares One device. We regularly update this list with temporary workarounds and permanent fixes as they become available.

Olares One initial setup fails at 9% ​

Olares One fails during the initial setup process with the installation stopping at around 9% and prompting you to uninstall or reinstall.

During startup, the system performs an asynchronous NTP time synchronization before issuing security certificates. While this usually completes instantly, occasional delays can cause a certificate to be issued with a future timestamp. This is especially common if the device has not yet updated from its default shipped timezone of UTC+8, finally causing the activation to fail.

Workaround ​

Uninstall the incomplete installation and reactivate the device.

Step 1: Attempt SSH connection ​

Try this method first if you do not already have a monitor and keyboard connected to your Olares device.

  1. Get the local IP address of Olares One from the Activate Olares page on the LarePass app. IP address displayed on Activate Olares

  2. Open a terminal on your computer.

  3. Type the following command, replace <local_ip_address> with the above local IP address, and then press Enter:

    bash
    ssh olares@<local_ip_address>

  4. When prompted, type the default SSH password olares, and then press Enter.

  5. If the connection is successful, skip to Step 3.

Step 2: Log in locally ​

When the SSH access is unavailable, log in to the device locally using a monitor and keyboard.

  1. Connect a monitor and keyboard to your Olares One. A text-based login prompt is displayed on your screen automatically:

    text
    olares login:

  2. Type the username olares and press Enter.

  3. When prompted, type the default SSH password olares, and then press Enter.

Step 3: Run the uninstall command ​

  1. Once logged in, type the following command and press Enter. This command removes all installed components and data, restoring the device to the unactivated state.

    bash
    sudo olares-cli uninstall

  2. Wait until the uninstallation is completed.

Step 4: Reinstall and activate using LarePass ​

Before reinstallation

To ensure accurate time synchronization, let the device remain powered on for a few minutes before reinstalling, allowing it to automatically calibrate its internal time.

  1. Discover and link your Olares One based on your network setup.

  2. Find your Olares One from the list of available devices, and then tap Install now on it. The installation should now proceed and complete successfully.